ADIC Scalar 100 FCR-1, Installation And Operating Manual, Page: 94 / 96

,QGH[
,QGH[
Set clock, date, day of week........... 4-11
Single Initiator ................................. 3-3
SNMP,
Configuration ..................... 3-9, 4-11
Current Settings...................... 4-12
GET Command ........................... 4-12
SET Command ............................ 4-12
Managing Scalar 100 FCR-1 Module 5-1
Traps,
Manager IP Address .............. 4-13
Setting Priority........................ 4-13
Toggle Traps ........................... 4-12
Soft Addressing ............................... 3-4
Specifications ................................... 1-7
Static Addressing Table,
see Indexed Addressing
Stop Bits............................................ 2-7
Subnet Mask .................................... 4-7
Switched Fabric ............................... 1-1
Target ID .......................................... 4-6
Telnet,
Ethernet Configuration ..... 3-7, 4-7
Management via Ethernet ......... 2-7
TFTP for Upgrading Firmware...... 5-7
Trace History ................................... 5-6
Trace Levels ..................................... 4-10
Trace Settings Configuration ......... 4-10
Traps, SNMP.................................... 4-12
Troubleshooting,
Contact ADIC.............................. 6-4
Indicators .............................. 1-2, 6-1
Serial Port Problems ................... 6-4
Verification,
Addressing .............................. 6-3
Configuration.......................... 6-3
Devices..................................... 6-4
Fibre Channel Connection..... 6-3
HBA Device Driver ................ 6-4
Host Configuration ................ 6-4
SCSI Bus Configuration......... 6-2
SCSI Devices in NT ................ 6-3
Unpacking the Box.......................... 2-1
Update Current Trace Levels......... 4-10
Upgrade Firmware,
Using FTP .................................... 5-7
User Name .............................. 5-7
Password ................................. 5-7
Using Serial Connection............. 5-8
Using TFTP .................................. 5-7
User Name .............................. 3-8, 5-7
Vents ................................................. 2-2
Web Management Interface,
Accessing the Interface............... 5-9
Configuration .............................. 3-7
Making Changes ......................... 5-10
Managing the FCR-1 Module... 5-1
Password...................................... 5-7
User Name................................... 5-7
World Wide Name................... 3-4, 4-5
High.............................................. 4-5
Low............................................... 4-5
Write Buffer Command.................. B-1
XMODEM Transfers ....................... 5-8