ADIC FCR 250, User Manual, Page: 103 / 104

,QGH[
,QGH[
Initiator ID ................................... 4-7
Inquiry Data ................................ C-1
Information.................................. 1-3
Mapping Devices ........................ 1-3
Operation..................................... 1-3
Reset Operation........................... 5-6
SCSI-2 ........................................... 1-6
SCSI-3 ........................................... 1-6
SCSI-to-FC Mapping .................. 4-10
Fill............................................. 4-11
Single Initiator...................... 1-3, 3-3
Target ID ...................................... 4-7
Termination ................................. 6-2
SCSI Initiators to FC Targets.......... D-4
Security Settings .............................. 4-8
Serial,
Configuration ....................... 4-2, 4-5
Connection................................... 2-10
Baud Rate..................................... 4-5
Data Bits....................................... 2-9
Flow Control ............................... 2-9
Managing FCR 250 ..................... 5-1
Parity ............................................ 2-9
DB-9 Pin Assignments................ A-1
Stop Bits ....................................... 2-9
Upgrading Firmware.................. 5-7
Set clock, date, day of week........... 4-13
Single Initiator ................................. 3-3
SNMP,
Configuration ..................... 3-11, 4-14
Current Settings...................... 4-14
GET Command ........................... 4-14
SET Command ............................ 4-14
Managing FCR 250 ..................... 5-1
Traps,
Manager IP Address .............. 4-15
Setting Priority........................ 4-15
Toggle Traps ........................... 4-14
Soft Addressing ............................... 3-6
Specifications ................................... 1-8
Static Addressing Table,
see Indexed Addressing
Stop Bits............................................ 2-9
Subnet Mask .................................... 4-8
Switched Fabric ............................... 1-1
Target ID .......................................... 4-7
Telnet,
Ethernet Configuration ..... 3-10, 4-8
Management via Ethernet ......... 2-9
Temperature .................................... 1-8
TFTP for Upgrading Firmware...... 5-7
Trace History ................................... 5-6
Trace Levels ..................................... 4-13
Trace Settings Configuration ......... 4-12
Traps, SNMP.................................... 4-14
Troubleshooting,
Contact ADIC.............................. 6-5
Indicators .............................. 1-2, 6-1
Serial Port Problems ................... 6-4
Verification,
Addressing .............................. 6-4
Configuration.......................... 6-3
Devices..................................... 6-4
Fibre Channel Connection..... 6-3
HBA Device Driver ................ 6-4
Host Configuration ................ 6-4
SCSI Bus Configuration......... 6-2
SCSI Devices in NT ................ 6-3
Unpacking the Box ..........................2-1
Update Current Trace Levels.........4-13
Upgrade Firmware,
Using FTP.....................................5-7
User Name...............................5-7
Password .................................5-7
Using Serial Connection.............5-8
Using TFTP ..................................5-7
User Name...............................3-10, 5-7
Vents .................................................2-1
Web Management Interface,
Accessing the Interface...............5-9
Configuration ..............................3-11
Making Changes .........................5-10
Managing FCR 250......................5-1
Password......................................5-9
User Name ...................................5-9
World Wide Name ...................3-9, 4-5
High ..............................................4-5
Low ...............................................4-5
Write Buffer Command ..................B-1
XMODEM Transfers .......................5-7