ADIATEK ruby 45c, Use And Maintenance, Page: 13 / 14

GB GB
13
PROGRAMMED MAINTENANCE
INTERVENTION DAILY WEEKLY TWO-MONTHLY SIX-MONTHLY
RECOVERY TANK CLEANING
•
SUCTION FILTER CLEANING
•
SOLUTION TANK FILTER CLEANING •
BRUSHES CLEANING
•
BRUSHES DISASSEMBLY
•
SQUEEGEE CLEANING
•
FRONT SQUEEGEE RUBBER REPLACEMENT
•
REAR SQUEEGEE RUBBER REPLACEMENT
•
SQUEEGEE ADJUSTMENT CHECK
•
SQUEEGEE HOSE CLEANING
•
SOLUTION TANK CLEANING
•
BATTERIES ELECTROLYTE CHECK
•
BRUSHES MOTOR CHECK
•
SUCTION MOTOR CHECK
•
BRUSHES BASE GROUP CHECK •
SCREW TIGHTENING
•
RECOMMENDED BRUSHES
Brushes must be chosen depending on type of floor and dirt to be removed.
The employed material and the bristles diameter are the elements that distinguish different types of brushes.
MATERIAL CHARACTERISTICS
PPL (Polypropylene) Good wear resistance. Maintains characteristics with hot water up to 60°C. It is not hygroscopic.
NYLON Excellent wear resistance, even with hot water over 60°C. It is hygroscopic. It looses its physical characteristics over the time.
BRISTLES THICKNESS Thicker bristles are more rigid and must be used on smooth floor or floor with small joints.
On irregular floors with deep joints or relieves, it is recommended to use softer bristles which penetrate more easily and deeper.
Please be aware that when brushes bristles are worn out and therefore too small, they become rigid and unable to penetrate and
clean deeper. This may also happen with thicker bristles creating brush vibration.
MACHINE CODE QUANTITY DESCRIPTION
ruby 45c
48901200 2 Cylindrical brush nylon 0,6 Ø 95x462
48901210 2 Cylindrical brush PPL 0,4 Ø 95x462
48901220 2 Cylindrical brush PPL 0,3 Ø 95x462
48901230 2 Cylindrical brush nylon 0,3 Ø 95x462