AdHoc DMX RX, Quick Manual, Page: 2 / 2

DMX Present LED
ON DMX is present
OFF DMX is not present
Flashing Linked, but no active
radio link.
RF Link state
ON Signal between Adhoc DMX RX and transmitter
is active and in range
OFF No signal between Adhoc DMX RX and
transmitter. Or not in range.
Linked/unlinked
Blue Adhoc DMX RX is not linked .
Yellow Adhoc DMX RX is linked to a transmitter
Un
lin
k
D
at
a
+
D
at
a
-
G
N
D
UNLINK button
Press and hold the red button for
3 seconds to unlink from a
DMX transmitter
DMX
OUT
LED indicators
LED indicators are placed to the left of the DMX output terminal block.
Terminal block for
0.13 to 1.3 mm² wire
Status LED
ON Active radio link, DMX data present
OFF Adhoc DMX RX is not linked to a transmitter
Fast Flashing Linked, but no active radio link
Slow Flashing Active radio link, no DMX present
Ljusdesign AB
W
Södra Skeppsbron 4
W
802 80 Gävle, Sweden
info@ljusdesign.se
W
+46 (0)26 66 15 00
W
www.ljusdesign.se