EDM Serial-to-Ethernet Converters
User Guide ver. 2.0 | 2021-09-01
Phone: +420 538 890 720
15
E-mail: [email protected]
Reading Logs
You can view the converter logs in the web interface in the Logging menu (Fig. 10). The debug window
displays information about the operating modes and status of serial ports, states of connection and
authorization, connection errors, the amount of received data, etc.
Log output can be started (by Start button), interrupted (by Stop button), as well as saved into .txt text
file (by Save to file button).
Reboot and factory reset
Rebooting converter
To reboot the device click Restart button in
the Home menu.
Reset to factory settings
You can perform a factory reset in two ways:
Via web interface:
In the General settings menu, click the
Reset to factory defaults button.
With the RESET button:
To reset the settings, press the RESET button on the device housing with a thin object simultaneously
with turning on the power and hold the button pressed for about 5 seconds.
Fig. 10. Debug messages.
Fig. 11. Rebooting the converter.
Fig. 12. Settings reset.