Page 2 of 9
False Car User Manual
Version 10.20
THE SAFE USE OF A FALSE CAR
Respect these rules at all times
•
No unauthorized or untrained personnel to operate the False Car
•
Never overload the False Car. The maximum carrying capacity
(SWL) must be adhered to
•
The False Car is a mobile working platform and NOT a means of
transport for personnel or materials
•
The Safety Gear must be released to move in the downwards
direction
•
Winch must be driven upwards 50mm to release brake arm.
(False Car only)
•
The Safety Gear must be fully engaged when the False Car is not
ascending or descending
•
Do not drive False Car out of rails above guide wheels.
•
Never disconnect the rope climber hoist from the False Car for
lifting other materials
•
Carry out daily inspections on the False Car, its suspension and
Safety devices! (refer to False Car Daily Checklist located within
document holder)
•
Report irregularities to your charge hand or supervisor without
delay
SKYLOCK
Instructions to release
Never attempt to reset SKYLOCK when under load
DRIVE WINCH UPWARDS 50mm
RESET HANDLE
–
MANUAL TRIP LEVER -
Pull handle clockwise
Push LEVER anti-clockwise
to reset
to trip SKYLOCK manually
