Industrial
Electronic Devices
ADFweb.com S.r.l.
User Manual
EtherCAT Master / CAN
Document code: MN67E57_ENG Revision 1.000 Page 16 of 29
SET COMMUNICATION:
This section define the fundamental communication parameters of two buses, EtherCAT and
CAN.
By Pressing the “
Set Communication
” button from the main window for SW67E57 (Fig. 2)
the window “Set Communication” appears (Fig. 3).
The means of the fields for “Ethernet Connection” are:
In the field “
Device Name (Hostname)
” the Hostname to assign to the converter is
defined;
If the field “
Obtain an IP Address Automatically (DHCP for Cable Connection)
”
is checked, DHCP for LAN connection is enabled;
If the field “
Enable DNS
” is checked, DNS protocol is enabled;
In the field “
Primary DNS
” the IP Address of the primary DNS server is defined;
In the field “
Secondary DNS
” the IP Address of the secondary DNS server is defined.
The means for the fields for the “CAN” are:
In the field “
Baudrate
” the baudrate of the CAN line is defined.
The means of the fields for the “Ethernet” section are:
In the fields “
IP ADDRESS
” the IP address of Ethernet side of the converter is
defined;
In the fields “
SUBNET
Mask
” the SubNet Mask of Ethernet side of the converter is
defined;
In the fields “
GATEWAY
” the default gateway of the network is defined. This feature
can be enabled or disabled pressing the Check Box field. This feature is used for going
out of the net.
Figure 3: “Set Communication” window
