Industrial
Electronic Devices
ADFweb.com S.r.l.
User Manual
EnOcean / PROFINET Slave
Document code: MN67C77_ENG Revision 1.000 Page 16 of 29
SET COMMUNICATION:
By Pressing the “
Set Communication
” button from the main window for SW67C77 (Fig. 2)
the window “Set Communication” appears (Fig. 3).
The means of the fields for “PROFINET” are:
In the field “
IP Address
” the IP address for PROFINET side of the converter is
defined;
In the field “
SubNet
Mask
” the SubNet Mask for PROFINET side of the converter is
defined;
In the field “
Gateway
” the default gateway of the net is defined. This feature can be
enabled or disabled pressing the Check Box field. This feature is used for going out of
the net;
In the field “
Tunneling Port
” the port used for transparent UDP communication is
defined;
In the field "
Name of Station
" the name of PROFINET side of the converter is
defined;
In the field “
Number Bytes Input
” the number of input byte of the slave station is
defined;
In the field “
Number Bytes Output
” the number of output byte of the slave station
is defined;
In the field “
Diagnostic
” insert the starting byte of the PROFINET array where you
will save the diagnostic of EnOcean. It is possible to enable/disable this function
using the checkbox.
Figure 3: “Set Communication” window
