Industrial
Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO:
www.adfweb.com
Phone +39.0438.30.91.31
User Manual
OPC UA Server / KNX
Document code: MN67B41_ENG Revision 1.000 Page 16 of 26
SET COMMUNICATION:
This section define the fundamental communication parameters of two buses, OPC UA and
KNX.
By Pressing the “
Set Communication
” button from the main window for SW67B46 (Fig. 2)
the window “Set Communication” appears (Fig. 3).
The means of the fields for “Ethernet Connection” are:
In the field “
Device Name (Hostname)
” the Hostname to assign to the converter
is defined;
If the field “
Obtain an IP Address Automatically (DHCP for Cable
Connection)
” is checked, DHCP for LAN connection is enabled;
If the field “
Enable DNS
” is checked, DNS protocol is enabled;
In the field “
Primary DNS
” the IP Address of the primary DNS server is defined;
In the field “
Secondary DNS
” the IP Address of the secondary DNS server is
defined.
The means of the fields for “OPC UA” are:
In the field “
IP Address
” the IP address of the converter is defined;
In the field “
Subnet Mask
” the SubNet Mask of the converter is defined;
In the field “
GATEWAY
” the default gateway of the net is defined. This feature can
be enabled or disabled pressing the Check Box field. This feature is used for going
out of the net;
In the field “
Port
” the port used for OPC UA communication is defined.
Figure 3: “Set Communication” window
