Industrial
Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO:
www.adfweb.com
Phone +39.0438.30.91.31
User Manual
OPC UA Client / J1939
Document code: MN67B17_ENG Revision 1.000 Page 21 of 30
Figure 9: “Variables in Write” section
The “Variables in Write” section is used to define the OPC UA variables to write from J1939 side (Fig. 9).
In “Variables in Write” section (Fig. 8), the means of the fields are:
If the field “
Enable
” is checked, the OPC UA variable is enabled;
In the field “
Display name
” the name of the OPC UA variable is defined;
In the field “
Node Type
” the type of the OPC UA node, which includes the variable, is defined;
In the field “
Node ID
” the name of the OPC UA node, which includes the variable, is defined;
In the field “
Var Type
” the data format of the OPC UA variable is defined;
In the field “
Name Space Index
” the Name Space Index of the node, which includes the variable, is defined;
If the field “
On Change
” is checked, the OPC UA variable is sent when the data on J1939 changes the value;
If the field “
On CMD
” is checked, the OPC UA variable is sent when a J1939 message is received;
If the field “
On Timer
” is checked, the OPC UA variable is sent cyclically;
In the field “
Time (ms)
” the delay in ms between two writings of the variable is defined (if “On Timer” is checked);