ADF Web HD67B14-B2, User Manual

Page: 16 / 28

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com Phone +39.0438.30.91.31
User Manual OPC UA Client / DeviceNet Slave
Document code: MN67B14_ENG Revision 1.000 Page 16 of 28
SET COMMUNICATION:
This section define the fundamental communication parameters of two buses, OPC UA and
DeviceNet.
By Pressing the “
Set Communication ” button from the main window for SW67B14 (Fig. 2)
the window “Set Communication” appears (Fig. 3).
The means of the fields for “OPC UA Client” are:
In the field “ IP Address ” the IP address for OPC UA side of the converter is defined;
In the field “ SubNet Mask ” the SubNet Mask for OPC UA side of the converter is
defined;
In the field “ Gateway ” the default gateway of the net is defined. This feature can be
enabled or disabled pressing the Check Box field. This feature is used for going out
of the net;
In the field “ DNS ” the IP Address of the DNS server is defined. This feature can be
enabled or disabled pressing the Check Box field.
The means of the fields for “DeviceNet Slave” are:
In the field “ ID Device ” the ID of DeviceNet side is defined;
In the field “ Baudrate ” the data rate of DeviceNet bus is defined;
In the field “ Number Byte IN ” the number input bytes of DeviceNet Slave is defined
(max 455 bytes);
In the field “ Number Byte OUT ” the number output bytes of DeviceNet Slave is
defined (max 455 bytes).
The means of the fields for “NTP (Network Time Protocol)” are:
In the field “ Server URL ” the URL or the IP Address of the NTP Server is defined;
In the field “ Poll Time (seconds) ” the polling time for the time synchronization is
defined.
Figure 3: “Set Communication” window