ADF Web HD67973-B2-IA, User Manual

Page: 21 / 28

Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual IO-Link Slave / EtherNet/IP Master
Document code: MN67973_ENG Revision 1.000 Page 21 of 28
Figure 5: “Set EtherNet/IP Slaves Access” window
ETHERNET/IP ACCESS:
By Pressing the “ EtherNet/IP Access ” button from the main window for SW67973 (Fig. 2) the window “Set EtherNet/IP Slaves Access”
appears (Fig. 5).
This section is used to define the list of the EtherNet/IP slaves to read/write with the IO-Link Master.
The means of the fields are:
If the field “ Enable ” is checked, the polling to the EtherNet/IP slave is enabled;
In the field “ IP Address ” the IP Address of the EtherNet/IP slave is defined;
In the field “ Start Input ” the starting Input byte of the EtherNet/IP slave to map on IO-Link side is defined;
In the field “ Num Input ” the number of consecutive Input byte to map on IO-Link side is defined;
In the field “ Start Output ” the starting Output byte of the EtherNet/IP slave to write from IO-Link side is defined;
In the field “ Num Output ” the number of consecutive Output byte to write from IO-Link side is defined;
In the field “ Time Poll ” the polling time in ms is defined;
In the field “ Instance T > O ” the instance of the assembly for the Target to Originator data direction is defined;
In the field “ Conn. Point T > O ” the connection point of the assembly for the Target to Originator data direction is defined;
In the field “ Instance O > T ” the instance of the assembly for the Originator to Target data direction is defined;
In the field “ Conn. Point O > T ” the connection point of the assembly for the Originator to Target data direction is defined;
In the field “ Dim Header T > O ” the dimension of the data header for the Target to Originator data direction is defined;
In the field “ Dim Header O > T ” the dimension of the data header for the Originator to Target data direction is defined;
In the field “ Mnemonic ” a brief description is defined.