Industrial
Electronic Devices
ADFweb.com S.r.l.
User Manual
PROFIBUS Master
/ MQTT
Document code: MN67950_ENG Revision 1.000 Page 23 of 36
U
SER
P
ARAMETERS
:
The section “User Parameters” is used to modify
the parameters of the PROFIBUS slave (Fig. 9).
In this section there are:
The List of all Parameters available for
the
PROFIBUS
device
(“User
Parameters”) (Fig. 9, point (1));
The Configuration of all parameters in
RAW (“Parameters in RAW (Hex)”) (Fig.
9, point(2));
The
“
Use
Parameter
Inserted
Manually
”, enable this option is possible
to insert manually the parameters of
Device and also of the Modules. Using
the
“
Modify
User
Parameters
Manually
”
button
is
possible
to
insert/modify the parametrization of the
device (and/or modules). For more info
see below. (Fig. 9, point(3));
The admited value for the selected
parameter. It is possible to select the
value desired and confirm it with the
“
Apply
” button. If no value appears in
this table, the “Min Value” and “Max
Value” are the limit of the parameter.
(Fig. 9, point(4));
The “
Apply
” button is used to confirm
the new value of the parameter, the
“
Default
” button is used to load the
factory value for the parameter. In “
New
Value
” edit box it is possible to set the
new value. (Fig. 9, point(5)).
Figure 9: “PROFIBUS Device – User Parameters” window
