ADF Web HD67949-B2, User Manual

Page: 20 / 32

Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual NMEA2000 / MQTT
Document code: MN67949_ENG Revision 1.000 Page 20 of 32
Figure 3f: “Set Communication  Wi-Fi” window
If the field “ Enable DHCP ” is checked, the converter acts as DHCP Server for the Clients connected. If the option is enabled, in the
fields “ DHCP First IP Address ” and “ DHCP SUBNET Mask ” the IP Addresses range used for DHCP is defined. In the field “ Lease
Time (seconds)
” the required time for the renewing of the IP Address assigned to the Client is defined;
In the field “ Max Client ” the maximum number of Wi-Fi Clients accepted is defined;
In the field “ Channel ” the channel for Wi-Fi communication is defined.
The means of the fields for Client configuration are:
If the field “ Obtain an IP Address automatically ” is checked, the
converter gets the IP Address using DHCP. Otherwise, the IP Address is
defined as static;
In the field “ IP Address ” the IP address of the converter is defined;
In the field “ Subnet Mask ” the SubNet Mask of the converter is defined;
In the field “ GATEWAY ” the default gateway of the net is defined. This
feature can be enabled or disabled pressing the Check Box field. This feature
is used for going out of the net;
In the field “ DNS ” the DNS address is defined. This field is required if the
server address is define by URL and not IP Address.
In the field “ Port ” the port used for MQTT communication is defined;
In the field “ SSID ” the name of the Wi-Fi network to connect is defined;
In the field “ Password ” the password used to connect to the Wi-Fi network
is defined.