ADF Web HD67947-B2, User Manual

Page: 18 / 31

Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual KNX/ MQTT - Coverter
Document code: MN67947_ENG Revision 1.000 Page 18 of 31
Figure 3e: “Set Communication  Wi-Fi” window
Figure 3d: “Set Communication  Ethernet”
window
E
THERNET
:
This section is used to define the general parameters of Ethernet. The means of the
fields are:
In the field “ Ip Address ” the IP address of the converter is defined;
In the field “ SubNet Mask ” the Subnet Mask of the converter is defined;
In the field “ Gateway ” the default gateway of the net is defined. This
feature can be enabled or disabled pressing the Check Box field. This feature
is used for going out of the net;
In the field “ DNS ” the DNS address is defined. This field is required if the
server address is define by URL and not IP Address.
W
I
-F
I
:
This section is used to define the general parameters of Wi-Fi. It is possible to
defined the type of Wi-Fi communication:
Access Point;
Client.
The means of the fields for Access Point configuration are:
In the field “ IP Address ” the IP address of the converter is defined;
In the field “ Subnet Mask ” the SubNet Mask of the converter is defined;
In the field “
GATEWAY
” the default gateway of the net is defined. This
feature can be enabled or disabled pressing the Check Box field. This feature
is used for going out of the net;
In the field “ DNS ” the DNS address is defined. This field is required if the
server address is define by URL and not IP Address.
In the field “ Port ” the port used for MQTT communication is defined;
In the field “ SSID ” the name of the Wi-Fi network to create is defined;
In the field “ Password ” the password used for Wi-Fi connection is defined;