ADF Web HD67909-A1, User Manual

Page: 16 / 30

Industrial Electronic Devices
ADFweb.com S.r.l.
User Manual Modbus TCP Slave / HART Master
Document code: MN67909_ENG Revision 1.001 Page 16 of 30
SET COMMUNICATION:
This section define the fundamental communication parameters of HART and Modbus
buses.
By Pressing the “
Set Communication ” button from the main window for SW67909 (Fig.
2) the window “Set Communication” appears (Fig. 3).
The means of the fields for the “HART Master” section are:
In the field “ Address ” the type of Master is defined;
In the field “ Retry Limit ” the maximum number of retries in case of missing
response from HART device is defined;
The means of the fields for the “Modbus Slave” section are:
In the field “ IP Address ” the IP address of the converter is defined;
In the field “ SubNet Mask ” the Subnet Mask of the converter is defined;
In the field “ Gateway ” the default gateway of the net is defined. This feature can
be enabled or disabled pressing the Check Box field. This feature is used for going
out of the net.
In the field “ Port ” the port used for Modbus TCP communication is defined;
The means of the fields for the “Web Pages” section are:
In the field “ User ” the user name for webserver’s authentication is defined;
In the field “ Password ” the password for webserver’s authentication is defined.
Figure 3: “Set Communication” window