ADF Web HD67878-A1-2A, User Manual

Page: 20 / 37

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com Phone +39.0438.30.91.31
User Manual IO-Link / SNMP Agent
Document code: MN67878_ENG Revision 1.000 Page 20 of 37
SET COMMUNICATION:
This section defines the fundamental communication parameters of SNMP.
By Pressing the “
Set Communication ” button from the main window for SW67878 (Fig. 2)
the window “Set Communication” appears (Fig. 3).
The means of the fields for “IO-LINK” are:
In the fields “ Select Device ” the type of IO-LINK channels is defined;
The means of the fields for “SNMP Agent” are:
In the field “ IP ADDRESS ” the IP address of SNMP side of the converter is defined;
In the field “ SUBNET Mask ” the SubNet Mask of SNMP side of the converter is
defined;
In the field “ GATEWAY ” the default gateway of the network is defined. This feature
can be enabled or disabled pressing the Check Box field. This feature is used for going
out of the net;
In the field " SNMP Name of Station " the name for SNMP Agent station is defined;
In the field " Contact " the contact for SNMP Agent station is defined;
In the field " Location " the location for SNMP Agent station is defined;
In the field “ Version ” the version of SNMP is defined;
If SNMP V3 is used, the following fields must be filled:
o
In the field “ User ” the user for the SNMP authentication is defined;
o
In the field “ Security Level ” the type of security used is defined;
o
In the field “ Authority ” the password for the SNMP authentication is defined;
o
In the field “ Authority Mode ” the mode used for the authentication is defined;
o
In the field “ Privacy ” the password for Privacy authentication is defined;
o
In the field “ Privacy Mode ” the mode used for Privacy is defined;
Figure 3: “Set Communication” window