Industrial
Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO:
www.adfweb.com
Phone +39.0438.30.91.31
User Manual
IO-Link / DeviceNet Slave
Document code: MN67869_ENG Revision 1.000 Page 21 of 36
SET COMMUNICATION:
This section defines the fundamental communication parameters of DeviceNet.
By Pressing the “
Set Communication
” button from the main window for SW67869 (Fig. 2)
the window “Set Communication” appears (Fig. 3).
The means of the fields for “IO-Link” are:
In the fields “
Select Device
” the type of IO-Link channels is defined;
The means of the fields for “DeviceNet Slave” are:
In the field “
Device ID
” the ID of the DeviceNet side is defined;
In the field “
Baud Rate
” the data rate of DeviceNet line is defined;
In the field “
Number Byte In
” the number of input byte of DeviceNet is defined;
In the field “
Number Byte Out
” the number of output byte of DeviceNet is defined.
The means of the fields for the “Ethernet” section are:
In the fields “
IP ADDRESS
” the IP address of the converter is defined;
In the fields “
SUBNET
Mask
” the SubNet Mask of the converter is defined;
In the fields “
GATEWAY
” the default gateway of the network is defined. This feature
can be enabled or disabled pressing the Check Box field. This feature is used for going
out of the net.
Figure 3: “Set Communication” window
