ADF Web HD67835-B2-N, User Manual

Page: 30 / 48

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com Phone +39.0438.30.91.31
User Manual DALI / CANopen
Document code: MN67835_ENG Revision 1.000 Pagina 30 di 48
MENU BAR
S
ETUP
:
This section defines the connection’s parameters to the Ethernet side of the HD67835 converter.
By Pressing the “
Setup ” button from the menu bar of the DALI Console software, the “SETUP” window appears (Fig. 12).
The means of the fields for the “SETUP” window are:
In the field “ IP ADDRESS ” insert the IP address set inside the converter;
In the field “ DEVICE PORT ” insert the communication port used for the Ethernet communication with the converter (fixed to
‘10000’);
In the field “ CONSOLE PORT ” insert the communication port used for the Ethernet communication with the converter (defined with
SW67835);
In the fields “ SCI X Protocol ”, it is possible to select the Ethernet protocol to use. It is possible to use SCI 1 (from Tridonic), SCI 2
(from Tridonic) or SCI 3 (from ADFweb.com);
In the fields “ DALIX ”, it is possible to select the DALI version to use. It is possible to use DALI1 or DALI2;
If the option “ DISABLE AUTOMATIC SCAN ” is checked, the automatic scanning of DALI side is disabled. The DALI side is scanned
only on Ethernet command;
If the option “ AutoRefresh ” is checked, the list of DALI devices is refreshed automatically;
In the field “ NUM DEVICES ” the number of DALI devices connected to the converter is defined.
Figure 12: “Setup” window