ADF Web HD67766-A1, User Manual

Page: 15 / 28

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com Phone +39.0438.30.91.31
User Manual IEC61850 Client / Modbus TCP Slave
Document code: MN67766_ENG Revision 1.000 Page 15 of 28
SET COMMUNICATION:
This section define the fundamental communication parameters of two buses,
IEC61850 and Modbus TCP.
By Pressing the “
Set Communication ” button from the main window for SW67766
(Fig. 2) the window “Set Communication” appears (Fig. 3).
The means of the fields for “IEC61850 Client” are:
In the fields “ IP Address ” the IP address for IEC61850 side of the converter is
defined;
In the fields “ SubNet Mask ” the SubNet Mask for IEC61850 side of the
converter is defined;
In the fields “ Gateway ” the default gateway of the net is defined. This feature
can be enabled or disabled pressing the Check Box field. This feature is used for
going out of the net;
In the field " VLAN " the identifier for the VLAN is defined;
In the field “ Application ID ” the Goose identification string is defined.
The means of the fields for “Modbus TCP Slave” are:
In the fields “ IP Address ” the IP address for Modbus TCP side of the converter
is defined;
In the fields “ SubNet Mask ” the SubNet Mask for Modbus TCP side of the
converter is defined;
In the fields “ Gateway ” the default gateway of the net is defined. This feature
can be enabled or disabled pressing the Check Box field. This feature is used for
going out of the net;
In the field “ Port ” the port used for Modbus TCP communication is defined.
Figure 3: “Set Communication” window