Industrial
Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO:
www.adfweb.com
Phone +39.0438.30.91.31
User Manual
J1939 / Modbus Slave
Document code: MN67432_ENG Revision 1.100 Page 21 of 32
UPDATE DEVICE (ONLY FOR THE HARDWARE WITHOUT USB PORT):
By pressing the “
Update by CAN
” button it is possible to load the created Configuration into the device; and also the Firmware, if is
necessary.
In order to load the parameters or update the firmware in the Converter, follow these
instructions:
Connect the AC67400 to the PC;
Connect the CAN port of AC67400 to CAN port of HD67432;
Feed the HD67432;
Turn on the device;
Select the “
COM port
” and press the “
Connect
” button;
Press the “
Next
” button;
Select which operations you want to do.
Press the “
Execute update firmware
” button to start the upload;
When all the operations are “OK” turn OFF the device;
Disconnect the AC67400;
Turn on the device.
At this point the configuration/firmware on the device is correctly update.
Figure 8: “Update by CAN” windows
