ADF Web HD67431 Series, User Manual

Page: 19 / 32

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com Phone +39.0438.30.91.31
User Manual J1939 / Modbus Master
Document code: MN67431_ENG Revision 1.101 Page 19 of 32
TRANSMIT J1939:
By pressing the “ Transmit J1939 ” button from the main window of SW67431 the window “Transmit J1939 Frames” appears (Fig. 6):
The means of the fields of the table are:
In the field “ Priority ” insert the priority of the frame, in J1939 protocol is a number among 0,1,2,3,4,5,6,7. The number 0 is the
highest priority and 7 is the lowest;
In the field “ Data Page ” insert the data page, in the J1939 protocol it is 0 or 1;
In the field “ PGN ” insert the PGN of the data you would to transmit to J1939 (in the J1939 protocol the PGN is an identifier);
In the field “ Source Address ” insert the ID of device which sending the frame to;
In the field “ Num Byte ” insert the dimension of the PGN (number of bytes);
If the option “ Request ” is checked, the PGN is transmitted when a J1939 request is sent (On Request);
If the option “ Data Change ” is checked, the PGN is transmitted when the data from Modbus changes;
If the option “ On Timer ” is checked, the PGN is transmitted cyclically;
In the field “ Send Timer ” insert the delay with which the PGN is sent (only if you use the Transmition Type “On Timer”);
In the field “ Mnemonic ” the description for the frame is defined.
Figure 6: “Transmit J1939 Frames” window