Industrial
Electronic Devices
ADFweb.com S.r.l.
User Manual
M-Bus Master / BACnet Slave
Document code: MN67056_ENG Revision 1.200 Page 20 of 39
In the field “
Send Reset App
.
” is checked, the converter sends the “Application Reset” command to the slave.
In the field “
Variables List
” it is possible to select which type of variables definition to use. If is selected “By Type” it is necessary to
fill all fields in the section Variables with the correct values; otherwise if “By Position” is selected, it is possible to insert the
progressive number of the variable ned (page 27 for more information).
In the field “
Cut after
” it is possible to select after how many frames stops data requests. It is used when the slave has got many
data frames and you don’t need to read all them.
After that, pressing the “
ADD NODE
” button, a new node appears in the left side of the window. In order to modify a created node it is
necessary to select the desired node, change the wrong items and then press the “
MODIFY NODE
” button.
