Adey MagnaClean Professional3 Sense, Installation And Servicing

Page: 16 / 20

16
LED Flash pattern Glossary
1. Manual reading of magnetite levels inside the filter
Manual Reading LED OPERATION
Single press of
Check Button
then release. All 4 x LEDs will illuminate in sequential order
(left to right).
1.
2.
3.
4.
Only relevant LEDs will remain lit for a short period to represent magnetite level in filter.
A clean filter will show 1 (Green) LED.
Good
Good
Needs Attention
Needs Immediate Attention
2. Filter Reboot
Quick Onsite Reboot LED OPERATION
Press and release
Reset Button
.
To be used to perform a quick reboot if filter is
not responding as you were expecting.
All (GREEN) LEDs will illuminate for 2 seconds.
3. Factory Reset via App
Factory Reset LED OPERATION
Follow instruction in App to perform filter reset.
Use to disconnect filter from the property
(mandatory before filter can be connected
and fitted in another property). All (GREEN) LEDs will illuminate for 2 seconds.
4. Low Battery
Change Batteries within 30 days LED OPERATION
Single press of
Check Button
then release. If low battery - solid (RED) LED will illuminate for
2 seconds indicating batteries need replacing.
(GREEN) LEDs will still show magnetite reading.