MagnaClean
®
Professional
2XP
has been developed by the industry leading and
multi-award winning company that pioneered magnetic filtration. ADEY’s filters are
already protecting two million heating systems throughout the UK.
The x-treme performance dual-action filter can be installed anywhere on the main circuit.
However to achieve the best level of protection for the boiler, it is recommended that
MagnaClean Professional2XP is installed after the last radiator and before the boiler.
Installation
The following instructions are designed to
support engineers in the safe and effective
installation and servicing of MagnaClean
Professional2XP and should be followed at all
times.
Any queries should be directed to your
supervisor or ADEY direct on 01242 546717.
Open vented system
Combi/Sealed system
In both diagrams, position A is best
practice, while B is suitable.
N.B. We firmly recommend MagnaClean
Professional2XP is installed and serviced
by a qualified heating engineer.
Your system is protected by
Annual service required
www.adey.com
2
Servicing
2
3
1
2
Open drain
Close
drain
Open vent
Take care not to
over tighten
4
No need to
over tighten
7
6
7
CUT AND REMOVE SECTION
1
3
4
5
6
2
1
2
1
Open vent
Turn
valves
OFF
1
3
1
2
3
4
Clean
Clean
5
Clean
Remove sleeve
2
1
Open
vent
Turn
valves
ON
8
188mm
Attach valve clips
Open
vent
Turn
valves
ON
