6
5 stages can be programmed in maximum. Repeat the above steps to set the rest of
stages if required. If no program is required for the rest of stages, set time = 0 and
press “Set” for each until stage 5 is set
The program for Multi-Stage Cooking Mode (M) is now ready to use
Operation
– Program Mode (P) / Multi-Stage Cooking Mode (M)
Ensure the Convection Oven is plugged in
Press “Power” button to turn on
The oven is in “P” mode and “Convection” is selected by default. If no instruction is
given, the oven will begin to keep warm at 65°C
Press “P/M” button to switch from Program Mode to Multi-Stage Cooking Mode if
required
Press “Grill” button to switch from Convection to Grill if required
Press one of the set programs “1-5”, then press “Start/Stop” to begin
The oven will start to preheat & “pr-h” will be shown on screen
When preheat is finished,
the screen will show “food”. Open the door and place
food on the trays directly or with food container, then close the door tightly
Note: the oven will stop to heat if the door is not closed tightly
For Program Mode (P):
The oven will start to cook as the time set for individual
program selected
For Multi-Stage Cooking Mode (M):
The oven will start to cook as the time set for
all programs stored for Multi-
Stage Cooking in sequence order e.g. if “2” is selected
in M mode, the oven will process programs “2”,”3”,”4” and “5”
When time is up, buzzer beeps and the screen shows “end”. The food is now ready
for taken out. At the same time, the oven will begin to keep warm at 65°C
Caution: Be careful of hot air when the door is opened. Always use
heat-resisted gloves to take out the food.
Internal light can be switched on before or during the cooking process by pressing
the “Light” button. It will turn off automatically in 30s
Press “Steam” button during the cooking process for water spraying. It works only
when the oven temperature is above 130°C
Note:
There is a re-set button on the rear of the unit. The unit will stop working when
temperature is too high. Press the re-set button to resume normal operation once the
oven is cool down.
