USING YOUR STAND MIXER:
1. Fit the beaters or hooks to the beater holes (Fig 2).
2pcs beaters are different. 2pcs hooks are different.
They have to be fit in the correct position.
Fig 2
2. Plug in the appliance.
3. Hold the mixer handle. Lower the beaters or hooks into ingredients.
4. Switch on (6) and select the speed desired. The mixer begins to mix the ingredients in the
bowl.
5. When you have finished mixing, stop the mixer by pushing the speed button to “0"
immediately.
6. Wait until the beaters/hooks have stopped revolving, press the ejector knob (1) to remove
the beaters/hook. "Switch off the appliance before changing accessories or approaching which
move in use."
7.Unplug the appliance when you have finished mixing. Clean the beaters/hooks with water.
Make them dry, store in the box together with the main body.
8.You can press "turbo" button to accelerate the speed during mixing.
9. Hand shank(4), Stainless steel bowl can move around.
10. Stand release button(8), Can shake up and down, convenient take material and to take off
the fork.
CLEANING:
1. Wash the bowl, beaters and hooks with water after using.
2. Make them dry with cloth, store in the box.
WARNING:
Any other servicing should be performed by an authorized service Representative
.
4
