Instruction Manual
4
Trouble Shooting
Problem
Caused
Solution
Indicator light will not turn on and
unit will not heat
⚫
Plug not properly in-serted
⚫
Plug unit in
Heating indicator is not on.The
temperature is not increasing
⚫
Electric heater tubes is not
properly connected.
⚫
Heater is defective
Tighten both sides of electric heater
Replace electric heating tube.
Power indicator is on but the
desired temperature is not reached
⚫
Temperature controller is burned
out
Replace Thermostat Control
Temperature control is normal but
indicator is not on
⚫
Indicator light is burned out
Replace indicator.
Temperature indicator is on.But
heater tube is not hot
⚫
Temperature limiter has tripped
Reset over heating protecting button by
hand on bottom of electrical box
Temperature can not be controlled
⚫
Temperature Limiter is out of
order
Replace temperature limiter/Rest Button
Do not use the machine if any of the above occur.
Any troubleshooting corrections should be performed by a qualified technician
Daily Check :
Before using the machine, visually inspect for any signs of damage or frayed power cord. Be certain
machine is on a level countertop.
After turning it on, check for anything unusual before you use it.
Inspect the machine every day before using. If there is any question about operation, do not use
WARNING :Electrical Shock Hazard
*Keep water and other liquids from entering the
inside of the equipment.
*Liquid inside the equipment could cause an
electrical shock.
*Do not spray the unit or controls with water or
cleaning products.
*Liquid could contact the electrical components
and cause a short circuit or an electrical shock.
*Do not use unit if power cord is damaged or has
been modified
WARNING :BURNED HAZARD
*Do not touch hot food, liquid or heating
surfaces while equipment is heating or operating.
*Hot surfaces and food can burn skin. Allow the
hot surfaces to cool before handling.
*Do not drop or spill water into the cooking
surface as it can spray or splatter.