FR
EN
FIELD TEST DEVICE - LoRaWAN Europe - Guide utilisateur / User guide version V2.0.0
36
Page
of 50
3. SCREEN DESCRIPTION
The LCD screen of the product is split on few part :
• The START screen (Showing the firmware version) - Only on the powering up
• The JOIN screen - Only on the powering up or after a command mode exit
• The UPLINK/DOWNLINK “simplified” screen - with simplified radio indicators
• The UPLINK/DOWNLINK “advanced” screen - with indicators as RSSI, SNR..
• The GPS screen
• The PER screen (Packet Error Rate)
• The CONFIGURATION screen - accessible pushing 2 seconds on the screen button
The following icons are present on each screen of the product:
Item
Icon
Description
GPS status
(First on the left)
No icon
GPS has been deactivated
GPS has not been synchronized
GPS has been synchronized
Temperature
(Third on the left)
Temperature in °C
Battery
(Last on the left)
Battery level
Product in charge
3.1. Start Screen
The device is switched on using the ON/OFF switch located on the underside of the device. Once it has been switched on, the device’s LCD screen
will light up and the start menu will be displayed. This screen show the 2 firmware versions during few seconds.
NOTE :
If the device does not switch on, this could mean that there is insufficient battery charge. You would then need to connect the device to
a USB charger. When the battery is completely empty, it is possible that the device will not switch on, even when connected. Please wait a few
minutes before the device can be used.
3.2. Join Screen
When the device is configure in OTAA mode (Over the Air Activation) default mode, the product start a join request session (JRx) and show the
frequency, SF and power used during this session. When the product receive a Join Accept (JA) from the network, the information is displayed on
the “expert” screen. On the simplified screen only the icon on the status bar is visible.
Status bar
Advanced screen : Join Request
Advanced screen : Join Accept
Applicatif Firmware Version
RTU Firmware version
Firmware version
APP V02.00.00
RTU V02.00.02