EN
WMBUS ANALOG PWR - Guide utilisateur / User guide version V2.0.1
48
Page
of 83
FR
1.1. General description
1. PRODUCT PRESENTATION
IMPORTANT NOTE:
The WMBUS ANALOG PWR can only be started with a magnet.
Description:
• The ADEUNIS RF WMBUS ANALOG PWR is a ready-to-use radio transmitter enabling any type of 0-10V or 4-20mA sensor to be converted
into a wireless communicating sensor.
• This product meets the needs of users who need to remotely monitor data of any kind (temperature, pressure, level, humidity, CO², speed,
brightness, opening, etc.)
• The use of the WMBUS protocol allows you to integrate the WMBUS ANALOG PWR into any network that is already deployed.
• Two sensors can be supported by a single WMBUS ANALOG PWR transmitter.
• The product transmits the data from the sensors either periodically or in an event-related way based on top or bottom thresholds or on
detection of a change of state on its digital inputs.
• The configuration of the transmitter is accessible by the user via a micro-USB port, allowing in particular a choice of modes of transmis-
sion, periodicity or type of interface (0-10V or 4-20mA).
• The WMBUS ANALOG PWR is powered by an external power supply.
IMPORTANT NOTE :
The WMBUS ANALOG PWR can transmit measurements from the sensors but does not feed them (except the digital
version).
Composition of the package
The product is supplied in a cardboard box containing the following items:
top casing, electronic card, casing base plate,
cable gland, 3 gland seals, 2 CBLZ 2.2 x 19mm screws, 2 Fischer SX4 plugs
105
90
27
50
2 holes for passing
collars through
Rail-DIN unlocking
lever
4 fastening holes
Cables outlet
packing gland
Casing base
Casing base detail
Antenna