A
RF53
User Guide
Ref.
08-07-V6-lmn
p
20
without flow control, while using a serial baudrate greater or equal to 9600
bauds will produce data overrun.
We recommend to use RTS handshake (S216=0) for serial baudrate greater
or equal to the radio rate in order to avoid FIFO buffer overlap.
For example with serial baudrate greater or equal to 9600 bauds for Narrow
band (radio rate 10 kbits/s) and serial baudrate equal to 57600 bauds for
Wide band (radio rate 57600 kbits/s).
N
OTE
3
when changing the serial link configuration (rate, parity, stop bit…), the
answer is done using the old serial link format, the next command must be
sent using the new serial format.
For avoiding character lost, you should:
- use the flow control (S216=0),
- or use a serial rate lower to the radio rate,
- or limit the size of serial data to one radio packet.
N
OTE
4
(S200 register) see chapter channel selectionErreur ! Source du renvoi
introuvable.
and chapter radio channels & sub bands.
TOP
