Page 5
UPGRADING FROM UNEQUAL TO MAINS PRESSURE
Remove the insert disc using long nosed pliers by carefully
inserting the nose of the pliers into the indicated areas A & B.
2.
AREA A
AREA B
Remove the handle and disassemble the mixer:
1.
Unscrew the Venturi Jet using a 2.5mm Allen Key
3.
4.
REVERSE VIEW OF DISC
Locating pin socket
FRONT VIEW OF DISC
Locating pin
Reassemble mixer. Ensure that both black lines
marked on the cartridge and cartridge nut are
aligned when the mixer is in full cold position as
shown in Figure 1.
5.
Locating pin
Refit the seal with silicone grease if required and then insert disc
using the long nose pliers, ensuring that the locating pins go into the
corresponding sockets.
Patented New Zealand No. 605175
( FULL COLD POSITION )
Figure 1.
MAINTENANCE - CLEANING THE FILTER
1. Follow steps 1-2 above.
2. Flush out the disc in cold water.
3. Follow steps 4-5 above.
FILTER
REVERSE VIEW OF DISC
130422EI
