ASSEMBLY INSTRUCTIONS FOR
BRONX TABLE LAMP
Model # 6206-01
1.0
6206-01
1. Stick each wooden leg onto the metal hub so that
the metal hub screws go through the wooden leg
and create a tripod stance. Secure the tripod by
screwing the black metal handles onto the metal
hub screws.Be sure to place the rubber pads in
between the wooden leg and the black handle
before screwing on the handle.
2. Place metal socket plate on top of wooden legs
and use small screws to secure the plate to the
legs.
3. Place the shade onto the socket and screw on
socket ring to secure the shade.
4 .Install the bulb (Not Included) by screwing it into
the socket. Refer to the label on the lamp socket
for maximum wattage information.
IMPORTANT SAFETY INSTRUCTIONS:
This portable lamp has a polarized plug (one
blade is wider than the other) as a feature to
reduce the risk of electric shock. This plug will
fit in a polarized outlet only one way. If the plug
does not fit fully in the outlet, reverse the plug.
If it still does not fit, contact a qualified
electrician. Never use with an extension cord
unless plug can be fully inserted.
DO NOT ALTER THE PLUG.
GENERAL PRODUCT INFORMATION:
This product is suitable
for dry locations only.
BULB TYPE: (1) 60 Watt
Bulb(Not Included)
60 Watt
Socket ring
Shade
353 West 39th Street – 2nd Floor
New York, NY 10018
Tel: (212) 736 4440 Fax: (212) 736 4806
www.adessohome.com
Screw
Socket
3-way rotary
socket switch
Metal plate
Metal hub
Wooden leg
Wooden leg
Rubber pad
Plug
Handle
PARTS DIAGRAM:
(3) Screw
(1) Screwdriver
(3) Rubber pad
2
1