ASSEMBLY INSTRUCTIONS FOR
THE HS-7601B OLYMPIC
COMBO BENCH
FIGURE E
1)
CONNECT THE SEAT FRAME (A) TO THE WEIGHT COLUMN (B) USING THE
3/8” X 3” BOLTS (C), THE FLAT WASHERS (D) AND THE 3/8” LOCK NUTS (E).
FIGURE G
1)
FIRST INSTALL THE 2” END CAPS (K), THE 1” ROUND CAP (L) AND THE
BUMPER (J) INTO THE LEG SWING (A). NEXT ATTACH THE YOKE (E) TO THE
LEG SWING (A) USING THE 3/8” X 3” BOLT (G), THE FLAT WASHERS (H), AND
THE 3/8” LOCK NUT (I).
2)
NOW SLIDE THE LEG PAD TUBES (B) INTO THE LEG SWING (A) AND THE
YOKE (E). NEXT INSTALL THE LEG PADS (C) ONTO THE LEG PAD TUBES (B).
(NOTE IF THE LEG PADS ARE TIGHT MOISTEN THE LEG PAD TUBE WITH A
DAMP CLOTH FOR EASIER INSTALLATION.)
3)
INSTALL THE END CAPS (D) INTO EACH END OF THE LEG PAD TUBE (B).
4)
INSERT THE 1 3/4” SQUARE CAP (F) INTO THE YOKE (E).
5)
IF YOU HAVE OLYMPIC WEIGHTS SLIDE THE OLYMPIC ADAPTER (M)
ONTO THE LEG SWING (A).
FIGURE H
1)
INSTALL THE DIP TUBES (A) ONTO THE BENCH (B) USING THE 3/8” X 3”
BOLTS (C), THE 3/8” FLAT WASHERS (D), AND THE 3/8” LOCK NUTS (E).
2)
INSTALL THE TURN KNOBS AND THE REDUCER CAPS (F) ONTO THE DIP
TUBE (A).
FIGURE I
1)
INSERT THE LEG ATTACHMENT INTO THE BENCH.
*NOTE IF YOU ARE MISSING HARDWARE OR HAVE ANY FIT UP PROBLEMS PLEASE CONTACT ADER SPORTING GOODS TOLL FREE (800) 733-2338
FOR YOUR SAFETY READ ALL INSTRUCTIONS CAREFULLY