INSERT THE DRAWERS IN THE UNIT
1. START AT THE BOTTOM AND WORK UP.
2. HOLDING THE FRONT END OF THE DRAWER SIDES, TILT THE BACK OF THE DRAWER UPWARDS TO
GET THE WHEELS ON THE DRAWER PAST THE WHEELS ON THE UNIT. ONCE THE WHEELS ARE CLEAR,
LEVEL OUT THE DRAWER AND SLIDE IT IN.
13
14
NOTICE: THE WRITTEN
INSTRUCTIONS CONTAINED
HEREIN ARE
COPYRIGHTED.
14-15
NOTICE: THE WRITTEN
INSTRUCTIONS CONTAINED
HERE IN ARE
COPYRIGHTED.
E = 30
Screw (Drawer Runner
to Drawer side & anti-tip)
3.0x16mm
O = 05 (Right Side)
Drawer Right Runner
DR
P = 05 (Left Side)
Drawer Left Runner
DL
E
E
E
DL
DR
E
E
E
ATTACH 5X DRAWER RUNNERS
1. POSITION THE RIGHT DRAWER RUNNER “DR” WITH THE WHEEL TOWARD THE BACK OF THE DRAWER
AND THE FRONT END ALL THE WAY FORWARD TOUCHING THE DRAWER FRONT.
2. FIRST SCREW GOES IN THE THIRD HOLE BACK FROM THE DRAWER FRONT.
3. SECOND SCREW GOES IN THE FIFTH BACK HOLE FROM THE DRAWER FRONT.
4. THIRD SCREW GOES IN FROM THE SIDE THROUGH THE FIRST HOLE IN FRONT OF THE WHELL.
5. REPEAT THE PROCESS ON THE LEFT SIDE AND FOR EACH DRAWER.
DO NOT STORE HEAVY
ITEMS IN THE TOP
DRAWERS. HEAVIER ITEMS
SHOULD BE STORED IN THE
LOWER DRAWERS TO
REDUCE THE POSSIBILITY
OF TIP-OVER.