adept technology Adept Cobra i600, User Manual, Page: 100 / 150

Chapter 6 - System Operation
100 Adept Cobra i600/i800 Robot User’s Guide, Rev E
Figure 6-14 Diagnostics Wizard Enable Power Sequence
4. The Wizard then tells you to press the blinking
High Power
button on the Front
Panel. See
Figure 6-15
.
This step turns on high power to the robot motors.
• The Robot Status LED glows solid amber or, on older iCobras, blinks green
rapidly.
• The code on the Diagnostic Panel displays
ON
.
NOTE: The Front Panel button must be pressed within 10 seconds.
Figure 6-15 High Power Button on Front Panel
Switch set to
Auto Mode
Press High Power button
when blinking (within
10 seconds)