ADEO Services YT6201-13, Assembly, Use, Maintenance Manual

Page: 41 / 49

EN
40
SAFETY INSTRUCTIONS
4. Use the full blower nozzle extension
5. Supply the product via a residual
current device (RCD) with a tripping
current of not more than 30mA.
6. Avoid using the machine in bad
weather conditions especially
when there is a risk of lightning.
Maintenance and storage
1. When the machine is stopped for
servicing, inspection, or storage,
or to change an accessory, shut
off the power source, disconnect
the machine from the supply and
make sure that all moving parts
are come to a complete stop. Allow
the machine to cool before making
any inspections, adjustments, etc.
Maintain the machine with care
and keep it clean.
2. Store the machine in a dry place out
of the reach of children.
3. Always allow the machine to cool
before storing.
4. When servicing the shredding
means be aware that, even though
the power source is switched off
due to the interlock feature of the
guard, the shredding means can
still be moved.
5. Replace worn or damaged parts
for safety. Use only genuine
replacement parts and accessories.
6. Never attempt to override the
interlocked feature of the guard.
Additional warnings
1. Warning! Do not operate the
product near open windows, etc.
2. Do not blow hard objects such as
nails, bolts, or rocks.
3. Apply extra care when cleaning
debris from stairs or other tight
areas.
4. Keep all parts of your body away
from the suction/blowing device.
Do not remove blockages or jams
when the product is switched on.
Make sure the switch is off when
clearing jammed material. One
moment of inattentiveness while
operating the product may result in
serious personal injury.
5. Carry the product by the handle
with the motor off. Handling the
product properly reduces the
possibility of personal injury.
6. Never use the product standing
on steps or a ladder. Do not work
above shoulder height.
7. If the product starts to vibrate
abnormally, check it immediately.
Excessive vibration can cause injury.
8. Always ensure the product is fully
assembled before using it. Never
attempt to use an incomplete
product or one fitted with an
unauthorized modification.
9. Check the suction/blowing device
regularly for damage, and if
damaged repair immediately.
10.Do not overload the product.