– 5 –
SYSTEM OVERVIEW (cont)
Alarms
When an alarm occurs, both the keypad and external sounders will sound,
and a message at the keypad will identify the zone(s) causing the alarm. In
addition, if your system is connected to a central monitoring station, an
alarm message will be sent. To stop the alarm sounding, you simply disarm
the system.
Fire Protection
The fire protection portion of your security system (if used) is always active
and will sound an alarm if a fire condition is detected. When an alarm (or
trouble) condition occurs, the keypad displays the number(s) of the zone(s)
that caused the problem, and displays the type of alarm or trouble — “FIRE”
and “ALARM,” or “CHECK” for trouble. The display remains until it is
cleared by entering an OFF sequence (your security code + OFF key) twice.
Chime Feature
Your system can be set to alert you to the opening of a door or window while
it is disarmed by using the CHIME mode. In this mode, three tones will
sound at the keypad(s) whenever a door or window is opened.
Phone Access and Voice Response Capability (optional)
Your system may include a phone module that will permit you to access the
system via a TouchTone phone, either on-premises or by call-in when you are
away. The phone access feature will enable you to do the following:
•
Receive synthesized voice messages over the telephone regarding the
status of the security system.
•
Arm and disarm the system and perform most function commands via the
telephone, with voice confirmation provided after each command entry.
www.PDF-Zoo.com