ADEMCO AVR24TLAX, Instruction Manual

Page: 5 / 28

4
ENGLISH
AVR24TLAX (E) QR34283
17
22 25
24
18 19
21
20 23
17. EJECT BUTTON
Press to remove the cassette. The EJECT button will
not operate in the RECORD mode.
18. STOP BUTTON
Press to stop the tape. The STOP button must be
pressed to end the RECORD and PLAY mode.
19. PLAY/STILL BUTTON
Press to play recorded material in the forward
direction. Pressing this during recording makes it
possible to check recordings.
Press to momentarily stop tape motion in the play
mode. The STILL function allows close inspection of
individual scenes. See the description of STILL
playback on page 20.
20.TIMER LED
The LED lights up during timer recording or timer
stand by mode.
21. ALARM LED
The LED lights up during alarm recording.
22. REC LED
The LED lights up during recording.
23. RECORD BUTTON
Press to start recording.
24. JOG DIAL
Turn the jog dial to reverse or advance the tape one
field in the play or STILL playback mode.
25. SHUTTLE RING
Turn the shuttle to rewind or fast forward the tape
during STOP mode.
Turn the shuttle during playback and a forward or a
reverse playback picture at high speed can be seen.
Turn the shuttle to play recorded material at the 03
speed in the reverse direction during the PLAY mode.
1
3
9
0
-7
5
7
-9
Reverse direction Forward direction
Forward search
Normal play
Still play
Reverse play
Reverse search
-5
-3
-1
REVERSE FORWARD
USING JOG/SHUTTLE RING
Use of the jog/shuttle ring allows many different kinds of
playback – normal play, forward search, reverse play
and reverse search.
Note: If the shuttle ring is operated in stop mode, the
VCR enters the fast forward or rewind mode.
■
How to use the jog dial on the VCR
Turn the jog dial during play or still play for forward or
reverse frame advance.
• Every time the jog dial is brought to the point where a
slight click is felt, the picture will move by one frame.
• Releasing the jog dial returns to still play.
■
How to use the shuttle ring
If the shuttle ring is operated during normal or still
playback, turning the ring to the positions indicated
gives the special effects shown.
• Release the shuttle ring for still play.
• If the shuttle ring is operated during still play
and is then released, the VCR re-enters the still
play mode. If the VCR is left for one minute after
still play is restored from reverse play, the VCR
will enter the stop mode automatically to
prevent damage to the tape.
• Numbers indicate tape speeds with normal play
as 0.
Notes:
• The picture may contain noise, streaking or other
distortion when it changes.
• If noise bars appear on the TV screen during still
mode, adjust the TRACKING control on the VCR to
adjust tracking.