AMM12
12-Inch B&W Monitor
Installation Instructions
WARNING:
The monitor should be installed in an area that is
clean, dry and well ventilated. Do NOT install the monitor where it
can get wet; such as near pools, sinks, open windows, etc. Do NOT
install the monitor in excessively dusty areas; dust can block
ventilation holes causing the monitor to overheat. Operate the
monitor on flat firm surfaces; NOT on surfaces such as rugs,
carpet, beds or sofas because these can block ventilation holes on
the bottom of the monitor. Do NOT install the monitor where items
such as drapes or curtains can block ventilation holes. If the
monitor is installed in a rack, make certain it has sufficient
ventilation.
WARNING:
If the monitor’s plug does not fit your power outlet, do
NOT modify the plug. Have a certified electrician update your
power outlet. Do NOT route the power cord where individuals can
trip on it. Do NOT route the power cord where it can be damaged
such as under a rug.
Place the monitor on a flat sturdy surface near a power outlet. Connect the
video input cable to the
Video In
BNC connector. The video input can be
from a camera, VCR, multiplexer or the loop output of another monitor.
Make certain the
Scan Mode Selector
is set to the correct standard for your area.
(EIA for most of North America and CCIR for most of Europe.)
Figure 4 – Single monitor connection
4
Summary of Contents for AMM12
Page 8: ...AMM12 12 Inch B W Monitor...
Page 10: ...AMM12 12 Inch B W Monitor 2...
Page 14: ...AMM12 12 Inch B W Monitor 6...
Page 16: ...AMM12 12 Inch B W Monitor 8...
