_________________________________________________________Battery Charger
All specification are subject to change without notice
INSTRUCTION MANUAL
2
CB123A_48_A24.AAA.015A1_R1_Eng
Rail mounting:
•
The module must be mounted in vertical position.
•
Other modules must have a minimum vertical distance of 10 cm to this power supply in order to
guarantee sufficient auto convection.
•
Mountig scheme:
Caution:
Switch off the system before connecting the module. Never work on the machine when
it is live.
Functional Characteristics
Charging Level Current:
With trimmer from 20% to 100% of In. Select the max. battery charge current
estimated from 10 to 20% of the nominal capacity
Battery Module (Output 1) 1-2 Pin:
Battery input.
Low Battery or Battery replacement:
In normal condition with battery in good status:
led fault off and contact close (3-4),
Any fault status of the battery: led fault on and contact open (3-5)
Diagnosis LED
•
Normal conditions:
o
Very fast blinking = recovery charging ( when the battery is too low, Under 7 Vdc)
o
Fast blinking = fast charge
o
Slow blinking = trickle charge (floating charge)
•
Error conditions, Led Fault on and Led Diagnosis:
o
1 blinking = Reverse polarity battery; Bad input voltage battery.
o
2 blinking = Battery not connected.
o
3 blinking = Short circuit battery element
o
5 blinking = Bad battery.(Internal impedance Bad or Bad battery wire connection)
Assembly: pull down the plastic block with
a screwdriver, place the CB on the rail and
release the plastic block.
The CB is now assembled on the rail.
Disassembly: pull down the plastic block and pullout
the module like the arrow in the scheme
