ADEEPT Smart Car Kit, Manual

Page: 21 / 58

www.adeept.com
17
The rocker arm should be mounted almost perpendicular to the steering plate, so it can turn to a
nearly equal degree towards left and right. But small deviation is acceptable. If not, remove the
arm and reassemble again, instead of turning it.
Assemble the following components
From the top view, the rocker arm should be in the middle of the rotation range, so it can rotate 90
degrees towards left and right. Otherwise, you need to readjust it again based on Step 4.2 above.
F687ZZ Bearing x2
Fixing screw
packaged with servo
Effect diagram after assembling
4.9 Assemble front wheels and steering part.