www.adeept.com
58
Then a terminal will pop up. The default account is pi.
The password for login is
raspberry
by default.
* When you typing in the password, nothing will appear on the screen but it does not mean
no input. Type in the password carefully and press
Enter
after it's done.
Log in successfully.
3.2. Download Program
Setting up in a Raspberry Pi may take you a lot of time, and there are too many libraries
needed, so we write a python program to do the most of works for you.
Download the program of the rasptank.
Note that the following two commands are all lowercase.
Input the code below to download:
git clone https://github.com/adeept/adeept_rasptank.git
Then setup
：
sudo python3 adeept_rasptank/setup.py
It may take some time to finish.
It may take 2-3 hours to install, and we need to wait patiently. Also do not turn off or
disconnect the Raspberry Pi. If the installation fails in this step, please contact us at
in time.
When the Raspberry Pi software is installed, the Raspberry Pi will automatically restart.
And the program runs automatically after booting. At this time PuTTy will automatically
disconnect.
The Raspberry Pi program has been installed when it comes to this step. Next we need
to assemble the robot, please shut down the Raspberry Pi and remove the power supply.
