Adedad PL10W, Instruction Manual

Page: 10 / 17

10
Do not use this product if any parts on the packing list are already assembled to your product
when you unpack it. Parts on this list are not assembled to the product by the manufacturer
and require customer installation. Use of a product that may have been improperly assembled
could result in serious personal injury.
If any parts are damaged or missing do not operate this product until the parts are replaced.
Use of this product with damaged or missing parts could result in serious personal injury.
Do not attempt to modify this product or create accessories not recommended for use with
this product. Any such alteration or modification is misuse and could result in a hazardous
condition leading to possible serious personal injury.
Do not connect to power supply until assembly is complete. Failure to comply could result in
accidental starting and possible serious personal injury.
Always use the correct size impact socket for bolts and nuts. An incorrect size
impact so
the
bolt or nut. Make sure that the impact socket and the mounting portion are not damaged before installing
the impact socket.
After inserting the impact socket, make sure that it is firmly secured. If it
comes out, do not use it.
Press the impact socket onto the anvil until it clicks (See Fig.2).
To remove the impact socket, simply pull the socket it off.
To install the driver bit, need insert the connecting
holder into the anvil as far as it will go first ,then itsert
the bit
To remove the driver bit, pull the driver bit out.
Fig.2