1
060100-Rev000-M10616
Components and Features
Key 1
TARE – Tare funtion
Key 2
UNIT – Change weighing unit (kg/lb/st)
Key 3
ON/OFF- Turn on and off (kg/lb/st)
Installation and Use of Scale
Only use the scale after positioning on a firm and even ground.
For new born babies use the delivered baby tray for weighing.
Toddlers may be weighed directly on the platform.
Insert Battery:
Open the battery compartment situated underneath the base of the scale and insert 2 long-life
Lithium batteries (Cr2032)which you found included. Make sure to follow strictly the pole markings.
Close the compartment properly and make sure that it is safely secured.
Dispose off used batteries as special waste and do not mix with household waste.
Fixing the baby tray:
Simply slide the baby tray over the weighing platform and make sure to connect both parts firmly
together.
Attention:
DO NOT lift the scale by the tray. Always support under the scale base.
Weighing
1. If required, place a cover (e.g. paper or cloth) on the tray
BEFORE
switching on. By doing this the
scale will find the zero point including the weight of the cover.
2. Press ON/OFF key and wait until ‘0.00 (0.0) is shown in the display after an automatic function
test.
3. Place the baby on the tray or induce the toddler to step on the scale.
4.
The scale will automatically display the weight of the baby/toddler and ‘
Hold’
this value until you
either turn off the scale manually or wait for the automatic off function after 30 seconds. The
weight result will remain in memory and can be recalled by re-starting the scale.
