Thank you for purchasing this high-quality product made by ADE. You have acquired a
set of scales that meet the highest technical standards and are of proven quality.
Please read these operating instructions carefully before using the product for the first
time and keep them in a safe place where you can find them whenever you need the
information contained in the instructions.
1.
Preparation for use
Inserting the batteries / Replace the batteries:
To replace the batteries open the lid of the battery compartment. Move the battery at the
recess downwards. In this way, the battery will be easy to take out. Make sure that you
do not bend the contact. Insert the new battery (1 x CR2032) and close the lid of the
battery compartment.
Safety guidelines:
Ensure that no objects fall onto the scales; otherwise, the scale
may be damaged.
Only use a damp cloth to clean the scales. Never use solvents
or abrasive cleaners. Do not put the scale under water. You
must clean all the plastic parts of the scales immediately after
they come into contact with grease, spices, vinegar or any other
strongly spiced or coloured foods. Avoid any contact with citric
acid.
Please note that only the bowl is dishwasher safe.
2. Handling
Switch-on the scale:
Place the scales on a firm, level base. Switch-on the scales by pushing the ON/OFF-key.
At first, the display indicates all characters and after the scales levelled-off, the
indication will be “0 g“ or “0
.0
oz“ according to the setting. Now the scales are
ready to use.
Automatic-/manual switch-off the scale
If the indicated weight does not change within two minutes, the scales will automatically
switch-off. To save the battery you can switch-off the weighing function manually by
pushing the ON/OFF-key.
Units of weight:
It is possible to change the unit of weight for country specific setting
g =
gram to oz =
ounce) by pressing the
g/oz
-key. Please pay attention to use the
scales under consideration of your country specific unit of weight.
Tare-function:
Use the TARE-key to set the scale to “0 g”. Place for example a bowl on the
weighing platform. Upon the weight is indicating press the TARE-key to set the
indication again to “0 g”. This process is repeatable until the max. capacity of
the scales (5
000
g) has been reached. After you remove the item(s) to be
weighed, the total weight is displayed as a minus value.
3. Error Messages
“Lo”
=
“Err” =
Indication that the battery is flat – Please replace the battery with
one CR2032.
Overload display – The
5000
g maximum capacity of the
scales has been exceeded. Immediately remove the load
from the scales; otherwise, the load cell could be
damaged.
4. Technical Data
Capacity x graduation: max. 5
000
g x 1 g
Dimensions:
250 mm x 230 mm x 170 mm
Battery:
1 x CR2032 (included)
Subject to technical changes due to further-development of the product.
5. Guarantee
ADE guarantees to rectify any defects due to material or manufacturing defects by means
of repair or replacement free of charge for a period of three years. In the case of guarantee
claims, please return the scales together with the sales slip to your retailer and stating the
reasons for the claim.
CE Declaration of Conformity
This device features radio interference suppression
in compliance with valid EC Regulation 2004/108
3
2
Open the lid of the battery compartment on the bottom of the
scale and remove the battery safety strip. Please observe the
correct polarity of the battery (+/-).
