ADE Juwel 1, Operating Manual

Page: 6 / 24

5 Juwel-200624-Rev010-UM-en
Packaging material are recycable material and may be disposed of under no circumstance in the
house case.
Please ask the public authorities about possibilities of a proper disposal.
The local regulations have to be absolutely adhered at the disposal.
The packing material may not be disposed of in free nature.
3.2 Installation
Place the slicer on a smooth, flat and stable surface.
Any unevenness of the surface on which the machine is rested can be compensated using the adjustable
feet.
In the event the motor ventilation area faces a wall, make sure that a space of at least 200mm is left between
it and the wall.
Leave enough room around the slicer so that it can be properly operated, cleaned and serviced.
It is advisable to leave a space of at least 300mm free around the machine.
The slicer works properly in places with a relative humidity level of less than 80% and near sources of heat of
no more than 30°C.
3.3 Wiring
Plug the machine into the outlet, making sure that the system features an electrical overload cutout. To
improve safety further, insert a 0.5 Amp fuse in the power supply box.
The blade should rotate anticlockwise seen from the blade guard side.
Should the direction of rotation of the three-phase slicers be incorrect, invert two of the three wires in the
plug.
3.4 Operation
Use the slicer as it was designed to be used. Never push the product towards the blade by hand. Keep hands
well away from the blade and use the relevant handle to move the product carriage safely back and forth.