Addvent AVCH60 Installation Instructions And User Manual Download Page 2

3

2

The AVCH60 is a 60cm ‘domestic-only’ Stainless Steel cooker hood

for installation over an electric or gas hob. The hood can be used for

extraction to the outside of a building or for recirculation. Equipped

with a powerful 3-speed electric motor, twin 12v lights and non stick

grease filter, it quietly produces strong suction and is easy to clean.

Safety Warning

The cooker hood is for domestic use only and is not suitable for
barbecues or other commercial purposes.

The cooker hood should only be operated by a responsible adult.

This appliance should be installed by a competent person, if
unsure about installation get a qualified electrician to install the
appliance.

The cooker hood and filter mesh should be cleaned regularly to
maintain efficient working.

Before cleaning, please switch the power off at the main supply.

Clean the cooker hood according to the instructions.

If there is any fault with the appliance, please call Addvent on
0117 923 9375 for advice.

This cooker hood is designed to be installed for air extraction or air re-circulation.
For air re-circulation charcoal filters are required. For air extraction, use the
150mm diameter flexible ducting provided. 

Please call Addvent for advice on 0117 923

5375.

Air Extraction:

The air is drawn into the appliance and cleaned by the grease filters and directed
outside.

If the on-site ventilation system does not have a non-return flap, the non-return flap
supplied with the appliance must be fitted in the exhaust socket in the motor unit
(see installation instructions).

Having a non-return flap fitted to the ducting ensures that air, once ducted to the
outside, cannot get back into the room again.

The flap remains closed when the cooker hood is switched off.

When the cooker hood is switched on, the non-return flap opens for the cooking
vapours to be ducted away.

Air Recirculation:

The air is drawn in and cleaned first by the grease filters and then by a charcoal
filter. The cleaned air is then re-circulated back into the kitchen through grilles in
the top of the cooker hood extension piece.

Before using the cooker hood in recirculation mode, ensure that the charcoal filter
is in place.

Operation Modes 

Appliance Dimensions

Specification

Model AVCH60:

Ratings: 220-240V ~50Hz; Motor input: 125W; 

Input: 205W; Air flow: 500m

3

/h; Lamps: ≤2x40W

Before Installation

Before installation, please ensure the area is clean.

After installation, make sure that the extractor is level.

It is prohibited to fit a cooker hood over a solid fuel stove.

All materials used in the fitment of this product must be non-flammable.

This appliance must not be connected to a chimney or vent flue which is in use.

Professional advice should be sought if ducting this appliance into a chimney or
vent flue which is no longer in use.

This appliance should not be connected to ducting which ventilates rooms with
fireplaces.

Before installation, unpack hood 
and check contents.

You should receive:
Hood
Decorative Chimney (bottom and top)
Hood Mounting Bracket
Chimney Mounting Bracket
Discharge Collar
Installation Manual
2m x 150mm diameter Flexible Ducting

Summary of Contents for AVCH60

Page 1: ...o avoid the risk of fire After cleaning leave the filters to dry before replacing them on the appliance When replacing the grease filters ensure that the locking mechanism is facing down Fitting and Replacing the Active Carbon Filter If the cooker hood is used in re circulation mode an activated charcoal filter must be inserted in addition to the aluminium grease filters These charcoal filters are...

Page 2: ...pliance must be fitted in the exhaust socket in the motor unit see installation instructions Having a non return flap fitted to the ducting ensures that air once ducted to the outside cannot get back into the room again The flap remains closed when the cooker hood is switched off When the cooker hood is switched on the non return flap opens for the cooking vapours to be ducted away Air Recirculati...

Page 3: ...t to the wall using the two ST5 x 50mm mounting screws and dry wall anchors Align the hood body with the hood mounting bracket Gently lower the hood until it securely engages the bracket see Figure 3 opposite Ensure the hood is level then fasten the hood body with the two screws at the rear Figure 2 If using the hood in air extraction mode fit the discharge collar non return flap into the air outl...

Page 4: ...h is delicate and will damage easily Operation Extraction Mode Only Care should be taken if operating the cooker hood at the same time and in the same vicinity as other heating appliances which depend on air for their operation This may include such appliances as wood oil gas or coal fired boilers and heaters gas ovens hobs and cookers and continuous flow or other water heaters Please seek special...

Reviews: