Step 5
Mount the board to the bottom cover.
Step 7
Lower the front of the top cover and making sure the two covers lined up
properly. Tighten the small retaining screw on the front of the bottom cover to
close the enclosure.
Bottom Cover
Universal eSATAp Cable
Universal eSATAp Cable
eSATAp to USB 3.0 Adapter
(REDESPU3 Only)
Step 6
Put the top cover on by holding it in
near vertical position and sliding the
two metal clips inside the two small
slots on the rear of the bottom cover.
Hybrid eSATA Port
(eSATAp)
USB 3.0/2.0 Port
Connecting the Ruby Enclosure to Your Computer
or
