USB 2.0 Cable Installation
Attach the USB-IDE cable’s “
MC 36 Connector
” to your Addonics Mobile
Drive firm and securely – you should not be able to disconnect the cable without
pressing the release notch.
For Power Installation please
refer to Diagram 2 from page5
USB drivers Installation
For Win98 and Win98SE
1. Make sure your computer is up and running
2. Verify that all cables are connected and there is power to the
drive.
3. Insert the USB cable to the USB Port.
4. A "New Hardware Found" message shall pops up.
5. Follow the ON SCREEN wizard and point to the location of
A:\USBWIN98 for the driver or insert the driver disc, go to
driver’s section, click on the USB2 driver to install.
6. Let Windows finish the installation and that’s it.
7. Double click My Computer icon and see if you have an extra
drive letter for the drive.
8. You may now access the drive.
For Windows Me, 2000 and XP
There are NO additional drivers required
Addonics Technologies – Mobile DVD±R/RW Users Guide v 1.0
12
